raspberry pi zero camera cable installation

Here are the main steps required to use a camera module on a Raspberry Pi: If you are now in the same situation, this article will answer all your questions. But I remember being puzzled with my first camera, having no idea how to plug it in and configure it on my Raspberry Pi. If you are thinking of shielding the flat cable with aluminum foil, you may or may not get a working cable: you will be adding a lot of capacitance, changing the transmission line characteristics.A camera is a must-have for any Raspberry Pi owner, as it allows you to try dozens of interesting new projects. Hence my original admonition of keeping things as short and as straight as possible. It also makes you more likely to interfere with other equipment, your neighbor's old analog TV, or maybe another pi on the next shelf with equally long cables. The standard (at least what's open to the public: ) only mentions length considerations for M-PHY ('Distance: optimized for short interconnect (<10 cm) but extendable to a meter with good quality interconnect or even further with optical converters and optical waveguides') D-PHY is a lot simpler, so it should have no problem with longer lengths as far as signal delays are concerned.Īs said, a long cable makes you more susceptible to interference from others. It this particular case it probably does not matter (it's more important that the signal paths are of exactly the same length), but this is the sort of consideration that most people won't think about.

A 1m cable will introduce about 5ns of delay (speed of light in circuits is a lower than in vacuum!), so if you are running at 1GHz, there are five symbols in transit on that 1m cable. The length limits come from two requirements: signal quality, and signal delays.

Raspberry pi zero camera cable installation